Installer Directory
author

Written-by

Janet Richardson

calendar

Updated on

Sep 05, 2024

Read Time : 3 Minutes

Types of Insulation

What are the different types of insulation available?

When insulating your home you have many different options to choose from with each offering different benefits. Every type of insulation has its pros and cons and will have varying environmental benefits that should be considered.

Blanket insulation

Blanket insulation

The most common type of insulation which is used in the home is blanket insulation which usually comes in rolls with a foil backing. The material normally used is glass wool which is made from recycled bottles which gives the material a good environmental rating. Glass wool insulation is one of the easiest materials to install and is the most cost effective.

Rock mineral wool insulation

Rock mineral wool insulation

Rock mineral wool insulation is a more solid material than glass wool so is suitable for situations where the material may be compressed. Mineral wool can be obtained in rolls and comes in varying thicknesses and widths. Rock mineral wool is a very effective fire safety measure as it is resilient to heat and fire.

Sheet loft insulation

sheet insulation

Sheet loft insulation comes in sheets and is usually used to insulate the sloping side of the roof inside a loft. This type of insulation can be more expensive and is energy intensive to manufacture but has a high insulation value.

Loose-fill insulation

loose fill insulaion

One of the more common forms of insulation is loose-fill and blown-in cavity wall insulation. Loose-fill takes the form of small particles that form a material that can conform to any space without disturbing structures. The most commonly used material for this type of insulation is cellulose, fibreglass and mineral rock wool which are all produced from recycled material. Loose-fill will typically be installed in wall cavities and attics/lofts and is installed via a pipe.

Sprayed foam insulation

sprayed foam insulation

Sprayed foam is also a common insulation and works in a similar way with liquid foam being poured or injected into place into wall cavities making it very versatile. Sprayed in foam is installed using a foaming agent and will expand and become solid as the mixture cures. Slow curing foams are available which will flow around any obstructions inside the wall cavity before hardening.

Structural insulated panels

Structural insulated panels

Structural insulated panels are prefabricated panels that can be used in wall, roofs and floors. They offer excellent insulation in comparison with traditional methods. They typically consist of 4 to 8 inch thick panels that are made to fit in a factory then shipped to the site and can be made to various sizes. A structural insulated panel would ideally be used in a new build property.

Sheep's wool insulation

Sheeps wool insulation

A new kind of insulation product is sheep's wool which can be used for a variety of insulating jobs such as between roof beams, under floors and in solid walls. Sheep's wool is an efficient insulator and offers an alternative to more synthetic types of insulation. Wool insulation can last over fifty years and is also treated against fire and to be resistant against insects.

Rigid foam insulation

Rigid foam insulation

Rigid foam is a type of insulation that is used where weight is in need of support like under a floor or in lofts. As well as having rigidity and durability, rigid foam also provides acoustic insulation by minimising the level of sound traveling through walls or raised floors, such as in flats etc.

COMPARE PRICES FROM LOCAL INSTALLERS

Compare prices from local companies fast & free

Enter your postcode to compare quotes from leading professionals. We promise to keep your information Safe & Secure. Privacy Policy

Roof and loft insulation

Loft Insulation

Much of the heat - up to 25% - lost in houses escapes through the roof due to the fact that heat rises.  Insulating your roof or loft to a recommended thickness of 270mm is the best way of stopping this heat from escaping. There are different types of loft insulation:

  • Blanket loft insulation (also called matting insulation) - the most common and easiest to install type of loft insulation. Made from mineral or glass fiber and comes in foil-backed rolls which can be placed between joists
  • Loose-fill insulation - made from fire retardant lightweight fibers and can be used in difficult to access spaces with irregular joists or to supplement existing insulation
  • Blown-in insulation - though not suitable for DIY installation, blown-in insulation, whereby cellulose mineral fibers are blown into loft space using specialist equipment, is quick to install and useful for spaces where access is limited, such as gaps between roof joists

Floor insulation

Floor insulation

Under floor insulation is another good way of preventing heat loss through the floor. This method is especially appropriate for older houses. Many older properties have ‘suspended floors’, where there is a gap underneath the floorboards. This gap can be filled by temporarily removing the floorboards and laying rolls of mineral wool insulation. If you choose to install this type of insulation yourself, it is important to ensure that you do not block ventilation points, as floorboards will rot without adequate ventilation.

Another highly inexpensive way of preventing heat loss via the floor is to fill the gaps between the floor and skirting boards using caulking or a sealant. It is also possible to place a layer of insulation, such as a polyfoam board, below your carpet in order to further improve energy efficiency.

Cavity and solid wall insulation

  Cavity wall insulation

The National Insulation Association estimates that 33% of a property’s heat is lost through the walls. Insulating your walls against this heat loss can make your property much more energy efficient. Most modern homes in the UK are built with cavity walls, that is, an inner and an outer wall with a space between them, which are designed to stop rainwater reaching the inside of the property. These cavities also allow heat to escape. It is possible to prevent heat from escaping by filling the gap between these two layers.

Cavity wall insulation is installed by drilling a small hole (around the size of a bottle cap) in the property’s outer wall and using a pump to fill the gaps with a polyurethane insulating foam. Though installing this is not a DIY job and must normally be done by professionals, it is quick to do and relatively inexpensive. It is also possible to install solid wall insulation, which can be fitted either internally or externally, with decorative coatings. This method of insulating walls is significantly more expensive and disruptive than cavity insulation, as it can sometimes require substantial building and decorating work.
Read more in our Blog: Insulate or not to insulate that is the question

 

Find a local installer

Welcome to the biggest directory of UK renewable energy companies

image

Related Articles

A Guide to Insulation for the UK in 2...

Everything you need to know about insulation We all know the value of having good in...

How does Insulation Work?

Thermal insulation is a means to prevent heat loss or heat gain by creating a barrier between t...

History of Insulation

Insulation is not a new thing, as you might expect. It was born out of our desire to keep warm...

Insulation Installers in the UK

This article references financial incentives that are no longer available.  We are currently...

What does Insulation Cost and what Gr...

What is the cost of insulation in the UK? Nearly everyone is feeling the effects of the cost...

Thermal Values of Insulation

What are U-Values, Lambda Values and R-Values and K-Values? R-Value An R–Value rating is...

Is my Property Suitable for Insulatio...

Insulation is suitable for all property types, though ultimately its effectiveness is dependent...

Is it Worth Insulating my Home or Bus...

Energy bills are set to rise and one of the ways you can help reduce the cost is by having your...

Requirements for Installing Insulatio...

What are the prerequisites to having insulation installed in a property? While insulation ca...

Benefits of Installing Insulation in...

What are the benefits of insulation? The are many benefits that come with insulating your ho...

Financial Incentives and Free Insulat...

This article refers to financial incentives that are no longer available.  It is here purely...

Insulation Maintenance

Whilst something like cavity wall insulation should last a lifetime, other forms such as loft a...

Find a local installer

Welcome to the biggest directory of UK renewable energy companies

Or

COMPARE PRICES FROM LOCAL INSTALLERS

Compare prices from local companies fast & free

Enter your postcode to compare quotes from leading professionals. We promise to keep your information Safe & Secure.

Privacy Policy
Contact
Contact Us

We keep your information Safe & Secure. Privacy Policy

What technology are you looking to install?
What do you require?
logo
Before you go... Can we help you with anything?

Leave your details and we'll contact you to discuss your requirements

We keep your information Safe & Secure. Privacy Policy

x
logo

quick and free price comparison for solar or heat pumps

We keep your information Safe & Secure. Privacy Policy